Blogs » Shopping » LCD Splicing Screen Care And Maintenance

LCD Splicing Screen Care And Maintenance

  • LCD splicing screen panel stains are broadly divided into two kinds. One is because of the airborne dust accumulated over time, and the other is the fingerprints and oil stains left by users inadvertently.

    LCD splicing screen installation there are two cases, one is the manufacturer outside the LCD screen also added a layer of protection, such as transparent hard plastic, so that our fingers and dust, etc. will not actually touch the LCD screen itself, as long as attention to its surface hygiene is sufficient。

    The second and most common is the LCD splicing screen is directly exposed, any external substances can easily come into direct contact with the LCD screen indicating that, at this time, we must be more careful when cleaning and maintaining the LCD screen.

    First of all, it should be noted that the surface of the LCD splicing screen looks like a solid black screen, in fact, in this layer of the screen manufacturers will add a special layer of coating. Therefore, when we clean, do not use any alkaline solution or chemical solution to wipe the surface of the screen, otherwise, it may dissolve the layer of coating, making the display worse.

    Here to introduce you to a few LCD splicing screen maintenance myths:

    Myth 1: use a soft cloth, glasses cloth, or tissue to wipe the LCD screen can not use glasses cloth and tissue to wipe the LCD screen, so it is easy to scratch the "delicate" LCD screen. For dust, we can first use the blowing method to blow it off, the remaining dust particles can use a special LCD wipe cloth in the LCD splicing screen panel gently wipe.

    Generally speaking, fingerprints and oil are not as easy to remove as the former, but if you use a special LCD wipe cloth, which is also easy to solve, because the special LCD wipe cloth is made of special fibers, with a much better wiping effect than the general high-grade glasses cloth, and soft will not scratch the screen, but also has the function of dissipating static electricity to prevent further adsorption of dust.

    Myth two: clean the LCD screen with water using water, liquid very easy to penetrate the LCD screen inside, so it is very easy to cause equipment to circuit short circuits, thus burning expensive LCD splicing screen panels. Not to mention for fingerprints and oil, water simply can not help, more often than not, the more wipe the more flowers.

    Myth three: use alcohol and some other chemical solvents to clean the LCD screen, in general, alcohol is a commonly used organic solvent, and can dissolve some dirt that is not easy to wipe away, if occasionally used to clean the LCD splicing screen shell, maybe nothing adverse effects. But be sure not to use alcohol to clean the LCD panel, once the use of alcohol wipe the LCD panel, it will dissolve this special layer of coating, which will have a negative impact on the display effect.

    If you have more ideas and suggestions about LCD splicing screen care and maintenance, welcome to discuss them.